Ideal speckle size calculator
Size the ideal speckle pattern for your digital image correlation (DIC) test. Enter your field of view, element size and camera resolution: the tool computes the recommended spot size and the suitable speckling techniques.
—
— mm
— px
—
How is the ideal speckle size calculated?
The calculator follows three steps:
- Pixel size on the part: the larger of field-of-view width ÷ horizontal resolution and field-of-view height ÷ vertical resolution (in mm per pixel).
- Target spot size in pixels: at least 5 pixels, and a quarter of the mesh element size when elements are larger than 20 pixels. Below 20 pixels per element, the tool warns you that a regularised DIC approach is advisable.
- Spot size in millimetres: spot size in pixels × pixel size, from which the suitable speckling techniques are deduced.
Example: a 200 × 150 mm field of view filmed by a 4096 × 3000 pixel camera gives 0.05 mm per pixel. With 40-pixel elements, the target spot is 10 pixels, i.e. 0.5 mm: a spray can or a speckle roller is suitable.
Which speckling technique for which spot size?
- Airbrush: about 0.05 to 0.3 mm
- Spray can: about 0.1 to 2 mm
- Speckle roller: about 0.2 to 1 mm
- Brush: about 1 to 30 mm
To go further, read our guides on how to make a speckle pattern suitable for DIC and on how to calculate the speckle pattern size for your DIC test.